Christie CP2306-RGBe User Manual page 78

Modify the settings of automation devices when parameters such as the user name or password change. If the
settings are not updated, the automation device might be unable to communicate with other theater hardware
or be controlled remotely.
1. In the left navigation menu, tap Automation > My Auditorium Devices.
2. In the left pane, select an automation device.
3. Modify these fields:
IP Address—The IP address of the automation device.
Port—The port used by the automation device to communicate with the projector.
Username—The username used to access the automation device.
Password—The password used to access the automation device.
Keep Alive Message—The message value that is sent to the automation device to ensure the
projector is not disconnected when inactive.
Keep Alive Interval (ms)—The time interval (in microseconds) for sending the Keep Alive
Message to the automation device.
4. Tap Save.
Remove an automation device when it is no longer required, or it has been physically removed from the
theater.
1. In the left navigation menu, tap Automation > My Auditorium Devices.
2. In the left pane, select an automation device.
3. Tap Delete.
4. To confirm the deletion, tap Delete.
Create new playlist triggers to activate an automation device in a playlist.
1. In the left navigation menu, tap Automation > Device Input Triggers.
2. Tap the Playlist Trigger tab.
3. Tap + New Playlist Trigger.
4. Complete the Name, Device Source, and Resume Playback On fields.
5. Tap Add.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
020-001835-02 Rev. 1 (05-2021)
Copyright 2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Automation
78