Christie CP2306-RGBe User Manual page 74

Jog
Projector Douser Open
Douser Close
Light On
Light Off
Standby
Channel
Revert Warp File
Full Power
Wait
Disable Subtitle
Jog
These are the available built-in commands for the Christie ACT:
Command
Buzzer
Button
Pulse Relay
Open Relay
Close Relay
Pulse GPO
Set All GPOs
Run Script
Flash LED
Set All LEDs
These are the available built-in commands for JNIOR devices:
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
020-001835-02 Rev. 1 (05-2021)
Copyright 2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Moves content forward by the time specified
Opens the douser
Closes the douser
Turns the light on
Turns the light off
Puts the projector in standby mode
Selects a specific projector channel
Reverts a modified warp file to the default settings
Places the projector in full power mode (douser open, light on)
Delays the execution of a macro
Disables subtitles for the current content and onward
Moves content forward by the time specified
Description
Activates the buzzer for the specified time (in milliseconds)
Simulates pressing or holding the ACT button
Sends a pulse to a specific relay
Opens a specific relay
Closes a specific relay
Sends a pulse to a specific GPO pin
Sets the values for all GPO pins
Runs a script on the Christie ACT
Causes a specific LED to flash
Sets values for all of the LEDs
Automation
74