Christie CP2306-RGBe User Manual page 29

Learn how to connect the projector to media devices and wired networks.
The system provides the MAC address of the projector automatically.
Connect the projector to the theater network to control it remotely and allow it to communicate with other
network devices.
1. Connect the Ethernet cable from the theater network to the Management port on the input panel.
2. In the left navigation menu, tap Service Setup > Network Settings.
3. In the Port list, tap Management.
4. Enter the network settings:
To obtain the network settings automatically, tap Automatic.
To enter the settings manually, tap Manual and complete these fields:
Field
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
5. Tap Save.
To ingest and play content, a network attached storage (NAS) device must be connected to the projector.
1. Connect the NAS device to the NAS port on the input panel.
2. In the left navigation menu, tap Service Setup > Network Settings.
3. In the Port list, tap Content-NAS.
4. Enter the network settings:
To obtain the network settings automatically, tap Automatic.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
020-001835-02 Rev. 1 (05-2021)
Copyright 2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Description
IP address of the projector
Subnet mask to which the IP address belong
IP address for the network gateway
IP address of the primary DNS server
Te IP address of the secondary DNS server
29