Christie CP2306-RGBe User Manual page 76

Set Video Input Channel
Active Trigger Input
Create a macro to make the projector perform a specific list of actions.
1. In the left navigation menu, tap Automation > Macro Editor.
2. In the right pane, tap Create New Macro.
3. Type a name for the macro.
4. Select the macro type.
5. Tap Create.
6. Add an action item to the macro:
a. In the left pane, expand the My Auditorium list.
b. Select the type of device the macro will apply to.
c. Tap the action item.
7. To test the macro, tap Test.
8. Tap Save.
Run a macro to make the projector perform a specific list of actions.
1. In the right toolbar, tap Run Macro.
2. Tap a macro.
Add an action item to a macro to have the projector perform an additional action when the macro runs.
1. In the left navigation menu, tap Automation > Macro Editor.
2. In the top right pane, select a macro from the list.
3. Add an action item to the macro:
a. In the left pane, expand the My Auditorium list.
b. Under Automation, Playback, or Projector, select the action item.
4. To save the macro, tap Save.
5. To test the macro, tap Test.
CP2306-RGBe, CP2308-RGBe, CP2310-RGBe User Manual
020-001835-02 Rev. 1 (05-2021)
Copyright 2021 Christie Digital Systems USA, Inc. All rights reserved.
©
Sets the video input channel
Controls eight SKA-3D presets
To use this command, a trigger input must be associated with each of the SKA-3D
presets
Automation
76