If The Connection Could Not Be Made - Ricoh 4420NF Operating Instructions Manual

Faxing
E E E E
Press the { { { { Start} } } } key.
2
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.
Reference
p.53 "Own Name/Fax Head-
er/Own Fax Number"
After transmission the standby
display reappears.
38
If the Connection Could Not Be
Made
If it is not possible to make a connec-
tion with the number you specified
because the line was busy or there
was a line problem, the machine redi-
als automatically.
When you want to remove originals
quickly or want to send other fax
messages, press the { { { { Clear/Stop} } } } key
ZHMS050E
and then resend the fax message us-
ing Memory Transmission.
Note
❒ If communication stops during Im-
mediate Transmission, an original
could be jammed. Remove the
jammed original and send it again.
See p.93 "Clearing Original Jams".