Table of Contents
Advertisement
Even though the control panel display isn't on in Energy Saver mode, indicators
that blink or light during communication or reception still work. When the Re-
ceive File indicator lights, exit Energy Saver mode and take the appropriate ac-
tion.
Energy Saver
mode type
Fax Standby
Energy Saver
Standby
*1
When options are not installed.
You can turn Energy Saver mode on or off with the User Parameters. By default,
Energy Saver Standby is turned on.
The machine enters Energy Saver mode when:
• Nobody uses the machine for about 5 minutes (the machine automatically en-
ters Energy Saver mode).
• The user holds down the { { { { Energy Saver/Clear Modes} } } } key for about 2 seconds.
To exit Energy Saver mode:
• In Energy Saver Standby mode, press the { { { { Energy Saver/Clear Modes} } } } key.
• In FAX Standby mode, press any key.
• Place an original.
• Pick up the optional handset or the external telephone handset.
Note
❒ When you load paper in Energy Saver mode, an error message will not be dis-
played even if the tray is not pushed in correctly.
❒ After loading paper, press the { { { { Energy Saver/Clear Modes} } } } key and check that
"Ready" is shown on the display.
Reception in Energy Saver mode
In Energy Saver mode, originals that have been stored in memory are still sent
and the machine can still receive messages.
When a message is received in Energy Saver mode, the machine prints it and re-
turns to Energy Saver mode.
8
Status
Display is off
The machine maintains the
heating roller temperature at
half the full temperature; warm
up takes less time. (Heater half
cool)
Display is off
The machine lets the heating
roller cool to room tempera-
ture; warm-up takes longer.
(Heater off)
How long be-
Power consumption
fore you can
print after exit-
ing Energy Sav-
er mode
Within about 30
20W
seconds
Within about 40
6W
seconds
*1
Advertisement
Table of Contents
