Immediate Transmission - Ricoh 4420NF Operating Instructions Manual

Immediate Transmission

Immediate Transmission is conven-
ient when:
• You want to send an original im-
mediately as it is scanning.
• You want to quickly check wheth-
er you have successfully connected
with the other party's fax machine.
• Your machine's memory is getting
full.
The machine dials immediately after
you press the { { { { Start} } } } key. The mes-
sage is scanned and transmitted page
by page without being stored in
memory.
Note
❒ You can only specify one destina-
tion for Immediate Transmission.
❒ When the Backup File Transmis-
sion Setting is on, Immediate
Transmission cannot be used. See
p.136 "Backup File Transmission
Settings", Advanced Features.
A A A A
Check that the Memory Trans-
mission indicator is not lit.
If it is lit, press the { { { { Memory Trans.} } } }
key.
B B B B
Place your original.
Reference
p.29 "Placing Originals"
C C C C
Select any scan settings you re-
quire.
Reference
p.40 "Scan Settings"
D D D D
Dial.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key, and then enter
the correct number again.
❒ When one G3 line is set as the
PSTN line (Outside) and the
other as the PABX line (Exten-
sion), you need to choose which
line you use for each transmis-
sion with the Line Select func-
tion.
Reference
p.43 "Dialing"
p.50 "Selecting the Line", Ad-
vanced Features
ZHMS040E
Immediate Transmission
2
37