Standby Display; Communication Display - Ricoh 4420NF Operating Instructions Manual

❖ ❖ ❖ ❖ Menu Display
A
Display for items which can be selected.
Press the { { { { Cancel} } } } key to cancel the selected function or entered value, and re-
B
turn to the previous display.
Press 0 or 1 to display another function on the display or move the brack-
C
ets to select other values.
Press the { { { { OK} } } } key to set a selected function or entered value, and return to
D
the previous display.

Standby Display

While the machine is on standby (immediately after it is turned on or after the
{ { { { Cancel} } } } key is pressed), the following display is shown.
❖ ❖ ❖ ❖ Returning the machine to the standby display
To return the machine to the standby display manually, do one of the follow-
ing:
• If you have placed an original and have not pressed the { { { { Start} } } } key, remove
the original.
• If you have not set an original, press the { { { { Energy Saver/Clear Modes} } } } key.
• If you are in User Tools mode, press the { { { { User Tools} } } } key or the { { { { Cancel} } } } key.

Communication Display

While the machine is communicating, the status is displayed.
❖ ❖ ❖ ❖ Memory Transmission
The destination's (Receiver's) name or fax number appears on the top of the
display.
ZHMS230E
Control Panel
1
21