Table of Contents
Advertisement
D D D D
Dial.
If you want to send the same fax to
more than one destination, press
the { { { { OK} } } } key, and then dial anoth-
er destination. Repeat this step for
all destinations.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key, and then enter
the correct number again.
❒ When destinations are specified
using Quick Dial keys succes-
sively, those destinations can be
added without pressing the
{ { { { OK} } } } key. You can set whether
to require to press the { { { { OK} } } } key
when specifying destinations
using Quick Dial keys succes-
sively with the User Parameters
(switch 09, bit 6). See p.140 "Us-
er Parameters", Advanced Fea-
tures.
❒ When one G3 line is set as the
PSTN line (Outside) and the
other as the PABX line (Exten-
sion), you need to choose which
line you use for each transmis-
sion with the Line Select func-
tion.
Reference
p.43 "Dialing"
p.50 "Selecting the Line", Ad-
vanced Features
E E E E
Press the { { { { Start} } } } key.
The machine starts scanning the
original.
The machine calls the destination.
The name or fax number which is
programmed as the Own Name or
Own Fax Number at the other end
is shown on the top of the display.
Reference
p.53 "Own Name/Fax Head-
er/Own Fax Number"
After transmission, the standby
display reappears.
Memory Transmission
ZHMS050E
33
2
Advertisement
Table of Contents
