Using Speed Dials - Ricoh 4420NF Operating Instructions Manual

Faxing
A A A A
Place your original, and then se-
lect any scan settings you require.
B B B B
Press the Quick Dial key in which
2
the destination number is pro-
grammed.
If the destination's name has been
programmed, the name is shown
on the display. If it is not, the fax
number is shown.
Note
❒ If you make a mistake, press the
{ { { { Clear/Stop} } } } key and try again.
❒ If you want to dial another des-
tination, press the { { { { OK} } } } key and
dial another fax number.
C C C C
Press the { { { { Start} } } } key.
46

Using Speed Dials

You can specify a destination simply
by pressing the { { { { Speed Dial} } } } key and a
Speed Dial code (000 to 199).
Preparation
You must program the destina-
tion's fax number in a Speed Dial
beforehand. Additionally, you can
program a name for the destina-
tion in the Speed Dial. To program,
edit, or delete Speed Dial, see p.68
"Speed Dial".
Note
❒ To check the contents of all Speed
Dials, print the Speed Dial list. See
p.105 "Reports/Lists", Advanced
Features.
ZHMS110E
❒ You can use codes 000-199 for
Speed Dials.
❒ You can have the label stored with
a Speed Dial printed on the first
page received at the other end.
A A A A
Place your original, and then se-
lect any scan settings you require.
B B B B
Press the { { { { Speed Dial} } } } key.
ZHMS120E