Facility Staff Operations - Panasonic VL-V901 Series Installation And Operating Instructions Manual

6.3 Facility staff operations

Facility staff can use an extension telephone of a PBX to perform a variety of operations.
Operations available when not on a call
1. Dial the extension number assigned to the control box.
R For systems that support enhanced features version 2 or later (page 92)
When multiple control boxes are connected, dial the extension number of the control box that the device to be
called is connected to.
2. Enter the feature number according to the feature you want to operate.
Feature number
(room number) #
*1
*2
*3
##00#
##01#
3. Follow the voice guidance.
Operations available when on a call
Enter the feature number according to the feature you want to operate.
Feature number Assignment
*000# Open the entrance door(s)
* (2-digit floor Open the entrance door(s) and allow the lift to visit the
number) # specified floor
*# Repeat the voice guidance
Room mode vs. reception mode
When the visitor call mode setting is set to room mode, lobby visitors can call a specific resident or room number, and
speak with residents directly. The resident can open the entrance door based on the conversation he/she had with
the visitor.
When the visitor call mode setting is set to reception mode, calls from lobby visitors are directed to a reception terminal,
even if the visitor called a specific resident or room number. Visitors do not speak directly with residents. The reception
terminal user can open the entrance door based on the conversation he/she had with the resident.
Gate call settings
Refer to 5.8 Gate call settings for more information on gate call settings.
For systems that support enhanced features version 2 or later (page 92)
If the terminal at the gate is used to call residents when using the gate call settings, residents can use their main
monitors to check images from the gate and confirm who is visiting.
Assignment
Call the specified room number
Call lobby station 1
Call lobby station 2
Call lobby station 3
Switch the visitor call mode to room mode
Switch the visitor call mode to reception mode
6. Basic Operations
83