Table of Contents
Advertisement
Parameter
SET WIDE/ZOOM
WIDE/ZOOM SETTINGS
ZOOM POSITION
SET POWER FREQ.
SET CAMERA SIGNAL
SET TIME&DATE
SET TIME OUT
MONITOR TIME OUT
TALK TIME OUT
SET LIFT
SIGNAL MODE TO LIFT
Description and available settings
Determines whether camera images are displayed in
wide mode or in zoom mode when monitoring begins.
[00]: WIDE
[01]: ZOOM
Determines the camera zoom position.
[01]: UPPER LEFT
[02]: UPPER SIDE
[03]: UPPER RIGHT
[04]: LEFT
[05]: CENTRE
[06]: RIGHT
[07]: LOWER LEFT
[08]: LOWER SIDE
[09]: LOWER RIGHT
Tells the system what frequency of power is supplied
to the lobby station.
[00]: 50 HZ
[01]: 60 HZ
Tells the system what signal format is used by the
external camera.
[00]: PAL
[01]: NTSC
Determines the system's time and date settings.
Determines the amount of time that passes when
watching camera images before the standby screen is
displayed.
[00]: 180 SEC
[01]: 90 SEC
[02]: 60 SEC
[03]: 30 SEC
Determines the amount of time that passes when
talking before the standby screen is displayed.
[00]: 90 SEC
[01]: 60 SEC
[02]: 30 SEC
[03]: 180 SEC
[04]: 300 SEC
Determines the signalling method used by the lift
controller to communicate with the lift. Select the signal
type according to the specifications of the lift.
[00]: RELAY
[01]: BINARY
5. Programming
Default
00
(WIDE)
05
(CENTRE)
00
(50 HZ)
00
(PAL)
1/JAN/2015
00:00
00
(180 SEC)
00
(90 SEC)
00
(RELAY)
61
Advertisement
Table of Contents
