Table of Contents
Advertisement
Parameter
Terminal 1–4 Reception Code
*3 For systems that support enhanced features version 2 or later (page 92)
Lobby Station 1–3 — Building settings
Buildings must be registered. The settings can be used to change how many buildings are registered at each
lobby station.
Parameter
Building No.
Control Box No.
Lobby Station 1–3 — Room settings
Room settings can be configured to support a maximum of 2240 rooms.
Parameter
Room No.
Resident Name
Building No.
*4 For systems that support enhanced features version 3 or later (page 92)
An "Open code" for unlocking the lobby station can be configured for each resident.
Important:
R To prevent intruders from entering the building, make sure to select open codes that are difficult to
guess, change them regularly, and keep them secret. Inform all relevant staff and residents of these
policies.
Lobby Station 1–3 — Room settings
Parameter
Room No.
Resident Name
Description and available settings
Determines whether terminal 1–4 is a reception
terminal or a normal terminal (i.e., cannot be used as
a reception terminal).
[0]: NORMAL
[1]: RECEPTION
R Gate call settings (page 74):
The lobby number of the reception room and the
reception terminal used in the reception must be
linked together in advance. When the number of
extension boxes used is increased, the DIP
switches of the extension boxes must be
configured.
[2]: GATE CALL (LOBBY GROUP 1)
[3]: GATE CALL (LOBBY GROUP 2)
[4]: GATE CALL (LOBBY GROUP 3)
Description and available settings
Registers the building number of a building.
A maximum of 20 buildings can be registered.
A maximum of 3 digits can be used (1–999; 0 cannot
be registered).
Determines the control box (1-4) to be linked to the
building number.
Description and available settings
Determines the room number.
(1–99999; 0 is displayed when the room is not
configured)
Determines the resident name for the corresponding
room number.
(20 characters max., uppercase letters only)
Determines the building number for the
corresponding room number.
Description and available settings
Determines the room number.
(1–99999; 0 is displayed when the room is not
configured)
Determines the resident name for the corresponding
room number.
(20 characters max., uppercase letters only)
5. Programming
Default
0
(NORMAL)
Default
1
1
Default
0
—
0
Default
0
—
57
Advertisement
Table of Contents
