Programming Multiple Control Boxes - Panasonic VL-V901 Series Installation And Operating Instructions Manual

5.7 Programming multiple control boxes

For systems that support enhanced features version 2 or later (page 92)
To increase the number of control boxes (max. of 4) that are connected to an extension box, do the following
operations.
The following illustration is an example of when 3 extensions boxes are connected to 4 control boxes.
Lobby Lobby
station station
group group
up to 6 up to 6
Extension Extension
box (2) box (2)
Lobby Lobby
Extension Extension
Lobby Lobby
station station
group group
up to 6 up to 6
1
PC setup tool: Load and edit the data
Start the setup tool. In the [Load and edit the data] section, configure the required [Room settings] and [General
settings].
2
PC setup tool: Upload the data to device (when connected to control box 1)
To upload the system information using control box 1:
a. Connect the PC to control box 1.
b. Click [1] to select control box 1 as shown next to "A".
c. Click all of the devices that you want to upload settings to as shown next to "B", and then click [Upload].
Control box (1)
2
PC
Control box (2)
2
PC
Control box (3)
2
PC
Control box (4)
2
PC
PC setup tool
1
3
PC setup tool
1
3
PC setup tool
1
3
PC setup tool
1
3
5. Programming
Distribution Distribution Main Main
monitor monitor
73