Facility Staff Operations - Panasonic VL-V900 Installation And Operating Instructions Manual

6.3 Facility staff operations

Facility staff can use an extension telephone of a PBX to perform a variety of operations.
Operations available when not on a call
1. Dial the extension number assigned to the control box.
2. Enter the feature number according to the feature you want to operate.
Feature number
(room number) #
*1
*2
*3
##00#
##01#
3. Follow the voice guidance.
Operations available when on a call
Enter the feature number according to the feature you want to operate.
Feature number Assignment
*000# Open the entrance door(s)
* (2-digit floor Open the entrance door(s) and allow the lift to visit the
number) # specified floor
*# Repeat the voice guidance
Room mode vs. reception mode
When the visitor call mode setting is set to room mode, lobby visitors can call a specific resident or room number, and
speak with residents directly. The resident can open the entrance door based on the conversation he/she had with
the visitor.
When the visitor call mode setting is set to reception mode, calls from lobby visitors are directed to a reception terminal,
even if the visitor called a specific resident or room number. Visitors do not speak directly with residents. The reception
terminal user can open the entrance door based on the conversation he/she had with the resident.
Assignment
Call the specified room number
Call lobby station 1
Call lobby station 2
Call lobby station 3
Switch the visitor call mode to room mode
Switch the visitor call mode to reception mode
6. Basic Operations
61