Table of Contents
Advertisement
5.2.5 Version 2 or 3 setup tool overview
For systems that support enhanced features version 2 or later (page 92)
By using the version 2 or 3 setup tool and connecting control boxes to extensions boxes, the system can be expanded.
The setup tool is organized into the following sections.
A
A
B
B
C
C
D
D
Select folder
Allows you to select the folder where you want to save your configuration files. Configuration files are saved in
CSV format.
Prepare the data
Allows you to choose whether you want to create new configuration files, use existing configuration files, or
download the current data from the system's devices.
R When there are multiple control boxes used in the system and you want to download data from the system's
devices, you must specify which control box (1-4) you are connected to.
Load and edit the data
Allows you to load the data saved in the configuration files into the setup tool for editing.
R When there are multiple control boxes used in the system, building settings must be configured before room
settings.
Upload the data to device
Allows you to upload the data saved in the configuration files to the system's devices.
R When there are multiple control boxes used in the system and you want to upload data to the system's devices,
you must specify which control box (1-4) you are connected to.
Time and date settings
Allows you to set the control box's time and date settings (used for time stamps saved in the system log).
Connection Check
Allows you to confirm the control box's connection to the main monitors, lift controllers, and lobby stations.
5. Programming
E
E
F
F
49
Advertisement
Table of Contents
