Panasonic VL-V901 Series Installation And Operating Instructions Manual page 13

3.1.5 Extension Box
Item
Screw (for mounting the box)
3.8 mm ´ 20 mm
Cable binder (for securing the
connected wires)
Power supply unit
VL-PS240
Screw (for mounting the power supply
unit)
4 mm ´ 40 mm
Cable binder (for securing the AC and
DC cables)
3.1.6 Additional items
The following items are also required for installation and
are not included.
– Power cables
Used to connect power supply units to lobby stations,
the control box, distribution boxes, and lift controllers.
For details, see page 36.
– Signal wires
Used to connect lobby stations, the control box,
distribution boxes, lift controller, main monitors, and
other devices. For details, see page 36.
– SD card
Used to log system event information. For details,
see page 77.
Quantity
2
1
1
2
2
3. Preparation
13