Table of Contents
Advertisement
Setup issues
Problem
Cannot upload data to the
system.
Main monitor display issues
Image from
Lobby station
R No image is displayed
R Images have poor quality.
Camera
No image is displayed (blue
screen).
R The cables are not correctly connected.
→ Check cable connections and make sure that all cables are fully
inserted into the terminals.
– You can also use the Connection Check function (page 48) of
the setup tool to check connections.
R Power is not connected to all units.
→ Check the power connection and connect power to all units.
R Switch settings are incorrect.
→ Check the switch settings.
R The in/out connections between units are incorrect.
→ Check the connections.
Display
(blue screen).
Cause & Solution
Cause & Solution
R The cables are not correctly connected.
→ Check cable connections and make sure
that all cables are fully inserted into the
terminals. In particular, check the
connection between the terminals (V1 and
V2) of the control box and distribution box.
– You can also use the Connection
Check function (page 48) of the setup
tool to check connections.
R Power is not connected to all units.
→ Check the power connection and connect
power to all units.
R The following settings are not configured to the
same values for all lobby stations connected to
the same extension box.
– Camera Connection
– Camera Name
– Camera Display Priority
– Camera Switching Image
– Camera Signal
– Time and date settings
– Monitor Time Out
– Talk Time Out
– Lift Signal Mode
– Lift Signal Time
→ Configure the same values for the settings.
R The cable is not connected to the camera.
→ Connect the cable to the camera.
R Power is not connected to the camera.
→ Check the power connection and connect
power to the camera.
R The signal format (PAL or NTSC) used in
incorrect.
→ Match the signal format setting (page 53)
to the signal format used by the camera.
7. Other Information
Page
29 to 43
Page
29 to 37
69
29 to 31
85
Advertisement
Table of Contents
