Panasonic VL-V901 Series Installation And Operating Instructions Manual page 60

5. Programming
Parameter
DOOR KEY OUT SIGNAL
DOOR KEY OPEN CODE
DOOR KEY EXTERNAL IN
DOOR KEY IN SIGNAL
SET CAMERA
CAMERA CONNECTION
CAMERA NAME
DISPLAY PRIORITY
SWITCHING IMAGE
60
Description and available settings
Determines whether the signal sent to the electric lock
is a closed signal (i.e., the signal is normally open) or
an open signal (i.e., the signal is normally closed).
[00]: CLOSE
[01]: OPEN
Determines the door open code. If disabled, the door
cannot be opened using a code.
(4 digits, or #### to disable)
Tells the system whether an access controller (door
opener, key switch, card reader, etc.) is connected to
the lobby station and used to unlock the door.
[00]: NO
[01]: YES
Determines whether the signal received from the
access controller is a closed signal (i.e., the signal is
normally open) or an open signal (i.e., the signal is
normally closed).
[00]: CLOSE
[01]: OPEN
R Available only when "DOOR KEY EXTERNAL IN"
is set to "YES".
Tells the system whether a camera is connected or not.
[00]: NO
[01]: YES
Determines the camera name.
[01]: CAMERA #
[02]: RECEPTION
[03]: GATE
[04]: CONTROL ROOM
[05]: RESTAURANT
[06]: HALL
[07]: POOL
[08]: SECURITY OFFICE
[09]: ENTRANCE
[10]: GYM
[11]: GUEST ROOM
[12]: KID'S ROOM
[13]: PARKING
[14]: TERRACE
[15]: LIFT LOBBY
Determines which camera image is displayed when
monitoring begins.
[00]: LOBBY
[01]: CAMERA
[02]: CAMERA ONLY
Determines whether visitors (lobby station users) can
switch between the lobby station camera and the
external camera.
[00]: NO
[01]: YES
Default
00
(CLOSE)
####
(DISABLE)
00
(NO)
00
(CLOSE)
00
(NO)
01
(CAMERA #)
00
(LOBBY)
00
(NO)