Facility Staff Operations - Panasonic VL-V900 Installation Manual

Operation
6

6-2. Facility staff operations

Facility staff can use an extension telephone of a PBX to perform a variety of operations.
Operations available when not on a call
1. Dial the extension number assigned to the control box.
2. Enter the feature number according to the feature you want to operate.
Feature number
(room number) [ # ]
[ * ] [ 1 ]
[ * ] [ 2 ]
[ * ] [ 3 ]
[ # ] [ # ] [ 0 ] [ 0 ] [ # ]
[ # ] [ # ] [ 0 ] [ 1 ] [ # ]
3. Follow the voice guidance.
Operations available when on a call
Enter the feature number according to the feature you want to operate.
Feature number
[ * ] [ 0 ] [ 0 ] [ 0 ] [ # ]
[ * ] (2-digit floor number) [ # ]
[ * ] [ # ]
Room mode vs. reception mode
When the visitor call mode setting is set to room mode, lobby visitors can call a specific resident or room number, and
speak with residents directly. The resident can open the entrance door based on the conversation he/she had with the visitor.
When the visitor call mode setting is set to reception mode, calls from lobby visitors are directed to a reception terminal,
even if the visitor called a specific resident or room number. Visitors do not speak directly with residents. The reception
terminal user can open the entrance door based on the conversation he/she had with the resident.
Assignment
Call the specified room number
Call lobby station 1
Call lobby station 2
Call lobby station 3
Switch the visitor call mode to room mode
Switch the visitor call mode to reception mode
Assignment
Open the entrance door(s)
Open the entrance door(s) and allow the lift to
visit the specified floor
Repeat the voice guidance
75