Basic Operations; System Conditions And Limitations; Lobby Station Operations - Panasonic VL-V901 Series Installation And Operating Instructions Manual

6.1 System conditions and limitations

Please note the following system conditions and limitations.
R Only one call or monitoring session can be handled at a time.
Subsequent calls will disconnect the current call (if the current call has lower priority), or will not be connected (if
the current call has higher priority).
Low priority
Medium priority
High priority
R All calls and monitoring sessions are disconnected after the pre-programmed "timeout" time elapses.
The default time is 90 seconds for calls and 180 seconds for monitoring.
Emergency calls are limited to 10 minutes.

6.2 Lobby station operations

6.2.1 Calling a resident
Entering a building number
For systems that support enhanced features version 2 or later (page 92)
If there are multiple buildings, a building number may need to be specified when entering the resident's room number.
1. Enter the resident's building number.
2. Press M N.
Entering a room number
1. Enter the resident's room number.
2. Press M N to call.
Searching by first letter of the name
1. Press M N.
2. Use the keypad to enter the first letter of the resident's name.
R Press a key repeatedly to scroll through the letters assigned to that key.
R Note the hints displayed at the bottom of the screen.
3. Press M N or M N to search for the desired name.
4. Press M N to call.
Searching through all names
1. Press M N.
2. Press M N or M N to search for the desired name.
3. Press M N to call.
6.2.2 Calling a receptionist
1
Press M N.
2
Press M N or M N to search for the receptionist.
3
Press M N to call.
General calls (lobby to main monitor, main monitor to terminal, etc.)
Monitoring
Emergency calls

6. Basic Operations

81