Deleting A Vlan; Enabling Vlans - Cabletron Systems DLE52-MA User Manual

Chapter 3: VLAN Configuration
3. Type a name of up to 32 ASCII characters in the VLAN Name field.
Press ENTER. If the name is valid, the Event Message Line in the
upper left hand corner of the screen displays "VLAN # UPDATED",
where # represents the entered VLAN name.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Press ENTER. The message "SAVED OK" displays.
3.4.4

Deleting a VLAN

To delete a VLAN from the current VLAN list, proceed as follows:
1. Enter the VLAN ID. The VLAN Name field will automatically update
to display the VLAN's name if that VLAN has been previously
configured.
2. Use the arrow keys to highlight the ADD/DEL field.
3. Press the SPACE bar to select DEL. Press ENTER. The VLAN is
removed from the list. The message "VLAN DELETED" displays in
the Event Message Line in the upper left-hand corner of the screen.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Press ENTER. The message "SAVED OK" displays.
The default VLAN cannot be deleted from the list.
NOTE
3.4.5

Enabling VLANs

To enable a VLAN, proceed as follows:
1. Use the arrow keys to highlight the Admin Status field of the selected
VLAN.
2. Press the SPACE bar to toggle the field to display Enabled.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message "SAVED OK" displays.
3-12 802.1Q VLAN User's Guide