Disabling Vlans; Changing The Forwarding Mode - Cabletron Systems DLE52-MA User Manual

3.4.6

Disabling VLANs

To disable a VLAN, proceed as follows:
1. Use the arrow keys to highlight the Admin Status field of the selected
VLAN.
2. Press the SPACE bar to toggle the field to display Disabled.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message "SAVED OK" displays.
The default VLAN cannot be disabled.
NOTE
3.4.7

Changing the Forwarding Mode

To change the forwarding mode of the switch, proceed as follows:
1. Use the arrow keys to highlight the Forward Default VLAN Out All
Ports field.
2. Press the SPACE bar or BACKSPACE to toggle between YES and
NO. The YES selection places the default VLAN (VLAN ID=1) in the
Egress Lists of all ports on the switch. The NO selection removes the
default VLAN from the Egress Lists of all ports, unless those ports
have a PVID of 1 (those belonging to only the Default VLAN).
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message "SAVED OK" displays.
802.1Q VLAN User's Guide
Device/VLAN Configuration Screen
3-13