Configuring General Parameters - Enterasys Aurorean ANG-3000 Installation & Service Manual

Chapter 3
Installing Software & Setting Networking Configurables

Configuring General Parameters

To set the General values of the ANG-3000/7000, perform the following steps:
Aurorean Installation & Service Guide
1 Click on the General main menu option.
The General Configuration Window appears as shown in Figure 43.
Figure 43 ANG General Configuration Window
2 Enter the name that will be shared by all Aurorean devices on your
corporate network in the VPN Domain Name field.
For best results, we recommend that you enter a name ending in
"VPN" (for example, ACMEVPN). This name should be different
from any Windows NT domain or Novell Directory Service (NDS)
names already in use on your network to prevent confusion. Do not
enter spaces or punctuation marks in this field.
Configuring General Values of the ANG-3000/7000
59