Upgrading Release 3.X To 3.5; Aps Set-Up & Configuration - Enterasys Aurorean ANG-3000 Installation & Service Manual

Appendix D
Aurorean System Upgrades

Upgrading Release 3.x to 3.5

APS Set-up & Configuration
Aurorean Installation & Service Guide
4 On your RiverMaster system, go to Add/Remove Programs in the
Control Panel and uninstall RiverMaster.
5 Delete the RiverMaster install directory. Its default location is:
\Program Files\Indus River Networks.
6 Reboot the RiverMaster PC.
7 Insert the Aurorean System Software CD ROM in the drive, browse to
the Aurorean 3.x\RiverMaster directory and double-click the
setup.exe file.
1 Insert the 3.5 Aurorean System Software CD ROM into the APS.
2 Start the VNC application or your Internet browser by pointing your
Web browser at the APS. In the Location field, type:
http://xxx.xxx.xxx.xxx:5800 (where xxx.xxx.xxx.xxx is the IP
address of the APS.
3 Press the
S
END
in Figure 8, or from the tab at the top of the VNC window if using a
browser.
4 At the APS login, type administrator. For password, type welcome.
5 On the CD ROM, browse to the ...\PolicyServer directory and
double-click setup.exe.
6 When the Question dialog box is displayed that asks if you'd like to
re-configure your VPN, Click Yes.
7 An MS-DOS window will appear running a perl script. Verify the
information displayed is accurate or change as required.
8 After the information is added you will be prompted to write
information to the database. Type y and press
button if using the VNC client, as shown
C -A -D
TRL LT EL
Upgrading Release 3.x to 3.5
to continue.
ENTER
123