Aurorean Network Gateway Specifications - Enterasys Aurorean ANG-3000 Installation & Service Manual

Aurorean Network Gateway Specifications

Aurorean Network Gateway Specifications
Table 3 provides additional information specific to Aurorean Network
Gateways. Unless otherwise noted, the information applies to all ANG
models.
Table 3 Aurorean Network Gateway-3000/7000 Specifications
Category
Performance Server Capacity
Tunnel
Performance
Protocols & Tunnel Protocols
Standards
Encapsulated
LAN Protocols
Routing Protocols
Authentication
Encryption
Compression
SNMP
102
Values
ANG-7000: <5000 simultaneous tunnels
ANG-3000: <1000 simultaneous tunnels
ANG-7000: 40 Mbps with Triple DES
ANG-3000: 20 Mbps with Triple DES
IP Security Protocol (IPSec) as defined in RFC 2401 and 2409
Point-to-Point Tunneling Protocol (PPTP) as defined in RFC
1234
Generic Routing Encapsulation (GRE) as defined in RFC 1701
and 1702
IP
IPX for access to Novell NetWare devices (ANG-3000/7000
only)
RIP V1, V2
OSPF
Support for dynamic Virtual Network addressing, local network
addressing, or static routes
Challenge Handshake Authentication Protocol (CHAP)
MS-CHAP (Microsoft proprietary version of CHAP)
MPPE, 40-bit and 128-bit configurable keys (RC4-compatible)
DES (56-bit) or Triple-DES (168-bit) with IPSEC only
Microsoft Point-to-Point Compression (MPPC)
Stac LZS
•Standard MIB-II (RFC 1213)
•Private VPN MIB (IRN-RTS-MIB)
Specifications
Aurorean Installation & Service Guide
Appendix A