Install The New Linux Kernel; Ftp The Ang Installation Kit To The Ang - Enterasys Aurorean ANG-3000 Installation & Service Manual

Upgrading from Release 2.x to 3.5

Install the New Linux Kernel

FTP the ANG Installation Kit to the ANG

120
5 Type bin and press
6 Type put linux-2.2-16-2.i386.rpm and press
7 When the transfer finishes, type bye or quit to end the FTP session.
1 Telnet to the trusted IP address of the ANG and login (the default
username and password are netadmin and netadmin).
2 Type su - root and press
3 Type cd /home/ftp/pub and press
4 Type rpm -i --force Linux-2.2-16-2.i386.rpm and press
.
ENTER
Ignore several warning messages which appear during installation.
5 When the Linux prompt (#) returns, type: reboot and press
1 When the APS is back up, browse to the ...\NetworkGateway
directory and copy the rts-3.5.xx-xxx.i386.rpm file to the
c:\temp directory.
2 Bring up a DOS command window. Type cd \temp and press
3 Type: ftp xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address
of the trusted interface on the ANG).
4 Log in as anonymous, using your email address as the password.
5 Type bin and press
6 Type put rts-3.5.xx-xxx.i386.rpm and press
7 When the transfer is complete, type bye or quit to end the FTP
session.
.
ENTER
. The default password is welcome.
ENTER
ENTER
.
ENTER
Aurorean System Upgrades
ENTER
or cd ~ftp and press
ENTER
Aurorean Installation & Service Guide
Appendix D
.
.
ENTER
.
ENTER
.
ENTER
.