Appendix D - Aurorean System Upgrades; Upgrading From Release 2.X To 3.5; Backup Aps Management Database On Rivermaster Pc - Enterasys Aurorean ANG-3000 Installation & Service Manual

This appendix describes the steps to upgrade your Aurorean system from:

Upgrading from Release 2.x to 3.5

This section details the following steps to upgrade from Aurorean 2.x to 3.1.x:

Backup APS Management Database on RiverMaster PC

Aurorean Installation & Service Guide
Aurorean System Upgrades Aurorean System Upgrades Aurorean System Upgrades Aurorean System Upgrades
! Release 2.x to 3.5 (see below)
! Release 3.x to 3.5 (refer to page 123)
! Backup the APS management database on the RiverMaster computer
! Reconfigure the APS
! FTP the new Linus kernel and install on the ANG
! FTP the ANG installation kit to the ANG
! Install the new ANG software
! Verify the VPN is up and running and upgrade RiverMaster
1 Log onto the RiverMaster PC and click the Configuration pullout.
2 Click on the Activity icon in the lower left corner of the pullout to
switch to the Active Tunnel/Service List view.
3 Expand the tree list under Active Service List (click the + symbol).
4 Click on Indus River Access.
The Access window appears as shown in Figure 5.
D
115