Ftp The New Linux Kernel To The Ang - Enterasys Aurorean ANG-3000 Installation & Service Manual
Virtual network aurorean policy server and aurorean network gateway
Hide thumbs
Also See for Aurorean ANG-3000:
- Application note (64 pages) ,
- Release notes (18 pages) ,
- Installation & service manual (168 pages)
Table of Contents
Advertisement
Appendix D
Aurorean System Upgrades
FTP the New Linux Kernel to the ANG
Aurorean Installation & Service Guide
10 When the Welcome window appears, accept all defaults and click
Next to continue.
After the installation sequence completes, a pop-up window appears.
11 When the dialog box prompts you to reconfigure your APS, click Yes.
An MS DOS screen appears with a Perl script as shown in Figure 9.
Verify the information displayed is accurate or change as required.
Figure 9 APS Perl Script Screen
12 Restart the APS.
All Enterasys services are started, the APS reboots and the VNC
remote control session ends.
1
When the APS is back up, browse to the \3rd Party Support\
Linux\Kernel directory and copy the
Linux-2.2-16-2.i386.rpm file to the c:\temp directory.
2
Bring up a DOS command window. Type: cd \temp and press
ENTER
3
Type: ftp xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address
of the trusted interface on the ANG).
4
Log in as ftp, using ftp as the password.
Upgrading from Release 2.x to 3.5
119
Advertisement
Table of Contents
