Reconfigure The Aps 3000/7000 - Enterasys Aurorean ANG-3000 Installation & Service Manual
Virtual network aurorean policy server and aurorean network gateway
Hide thumbs
Also See for Aurorean ANG-3000:
- Application note (64 pages) ,
- Release notes (18 pages) ,
- Installation & service manual (168 pages)
Table of Contents
Advertisement
Appendix D
Aurorean System Upgrades
Reconfigure the APS 3000/7000
Aurorean Installation & Service Guide
6
When the backup complete message appears at the bottom of the
window, click the download database button and browse to a local
directory.
7
Copy the database backup files, management.db and .authlock,
to a floppy disk.
8
If you have more that one APS, repeat the previous steps for each.
9
Close the RiverMaster software connected to the RMS database(s).
1
Insert the floppy disk with the backup files into the APS-3000/7000
floppy drive.
2
Start the VNC application or your Internet browser by pointing your
Web browser at the APS. In the Location field, type:
http://xxx.xxx.xxx.xxx:5800 (where xxx.xxx.xxx.xxx is the IP
address of the APS.
The VNC authentication window appears as shown in Figure 7. The
IP address you typed includes the VNC port number (5800) with
which to access the APS. The factory default IP address is 192.168.1.3.
Figure 7 Starting VNC Remote Control
Upgrading from Release 2.x to 3.5
117
Advertisement
Table of Contents
