Ip Address Translation Table (Ip.22) - Cabletron Systems SmartSwitch 1800 Reference Manual

::= { ip.21.1.12 }
ipRouteInfo
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Reference to MIB definitions specific to the particular
::= { ip.21.1.13 }

IP Address Translation Table (ip.22)

The IP address translation table contain the IpAddress-to-physical address equiva-
lences. Some interfaces do not use translation tables for determining address equiva-
lences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type,
then the Address Translation table is empty; i.e., it has zero entries.
ipNetToMediaIfIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Interface on which this entry's equivalence is effective.
::= { ip.22.1.1 }
ipNetToMediaPhysAddress
SYNTAX:
ACCESS:
STATUS:
156
this metric are determined by the routing protocol
specified in the route's
not used, its value should be set to
OBJECT IDENTIFIER
Read only
Mandatory
routing protocol which is responsible for this route, as
determined by the value specified in the route's
value. If this information is not present, its
ipRouteProto
value should be set to the OBJECT IDENTIFIER {
which is a syntatically valid object identifier, and any
conformant implementation of ASN.1 and BER must be
able to generate and recognize this value.
INTEGER
Read/Write
Mandatory
The interface identified by a particular value of this index
is the same interface as identified by the same value of
.
ifIndex
PhysAddress
Read/Write
Mandatory
value. If this metric is
ipRouteProto
.
-1
Cabletron Relay Access Products
},
0 0