Ip Routing Table (Ip.21) - Cabletron Systems SmartSwitch 1800 Reference Manual

IP Routing Table (ip.21)

The IP routing table contains an entry for each route presently known to this entity.
ipRouteDest
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Destination IP address of this route. An entry with a value
::= { ip.21.1.1 }
ipRouteIfIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Index value which uniquely identifies the local interface
::= { ip.21.1.2 }
ipRouteMetric1
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Primary routing metric for this route. The semantics of this
::= { ip.21.1.3 }
ipRouteMetric2
SYNTAX:
ACCESS:
152
IpAddress
Read/Write
Mandatory
of is considered a default route. Multiple routes to a
0.0.0.0
single destination can appear in the table, but access to
such multiple entries is dependent on the table-access
mechanisms defined by the network management protocol
in use.
INTEGER
Read/Write
Mandatory
through which the next hop of this route should be reached.
The interface identified by a particular value of this index
is the same interface as identified by the same value of
.
ifIndex
INTEGER
Read/Write
Mandatory
metric are determined by the routing protocol specified in
the route's
ipRouteProto
value should be set to
INTEGER
Read/Write
value. If this metric is not used, its
.
-1
Cabletron Relay Access Products