Table of Contents
Advertisement
figInterface (ipxConfig.2)
ipxCon
This is a table of IPX interfaces.
ipxInterfaceNumber
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Sequential number to identify the interface.
::= {ipxConfigInterface.6.1.1}
ipxInterfaceBlockedPortFlag
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Causes the IPX interface to be enabled (no) or disabled
::= {ipxConfigInterface.6.1.2}
ipxInterfaceType
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Interface type.
::= {ipxConfigInterface.6.1.3}
ipxInterfaceFrameType
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Frame type. (Depends on the interface type.)
::= {ipxConfigInterface.6.1.4}
ipxInterfaceMaxTransUnit
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Maximum frame size that can be transmitted or received
MIB Reference
INTEGER (
)
1–64
Read only
Mandatory
INTEGER { no (
), yes (
1
Read/Write
Mandatory
(yes) at node IPL. The port will remain in that state until
this parameter is changed.
INTEGER { Ethernet (
relay (
) }
4
Read/Write
Mandatory
INTEGER { typeII (
), raw (
1
Read/Write
Mandatory
INTEGER
Read/Write
Mandatory
) }
2
), 802.5 (
), X.25 (
), frame
1
2
3
), llc (
), snap (
2
3
)}
4
77
Advertisement
Table of Contents
