Table of Contents
Advertisement
::= { portPhyX25AdminTable.1.11 }
portPhyX25OperTable (portX25Group.2)
This table contains read-only variables that reflect the actual operating parameter
values. Unless a value was changed in the
became operational, the values in the
figured in the
portPhyX25AdminTable
listed below.
portPhyX25OperConnector (portPhyX25OperTable.1.1)
portPhyX25OperSpeed (portPhyX25OperTable.1.2)
portPhyX25OperGenerateClock (portPhyX25OperTable.1.3)
portPhyX25OperRcvClockFromDTE (portPhyX25OperTable.1.4)
portPhyX25OperDialOut
portPhyX25OperInactivityTimer
portPhyX25OperDisconnectTimer
portPhyX25OperSetupTimer
portPhyX25OperTrunkFlag
portPhyX25OperTrunkGroup
portLogicalX25AdminTable (portX25Group.3)
This table contains Netlink enterprise-specific objects to manage a logical
X.25 port. Changing one of these parameters may take effect on the operat-
ing port immediately or may wait until the interface is restarted, depending
on the details of the implementation. Most of the objects in this read/write
table have corresponding read-only objects in the
that return the current operating value. The operating values may be differ-
ent from the admin values if an admin variable was configured after the in-
terface was started.
portLogicalX25AdminFrDlci
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION: DLCI number used to identify the entry in the table.
::= { portLogicalX25AdminTable.1.1 }
MIB Reference
PDU, then a
response is returned.
genErr
portPhyX25AdminTable
portPhyX25OperTable
. The variables in the
(portPhyX25OperTable.1.5)
(portPhyX25OperTable.1.6)
(portPhyX25OperTable.1.7)
(portPhyX25OperTable.1.8)
(portPhyX25OperTable.1.9)
(portPhyX25OperTable.1.10)
INTEGER (
)
16–991
Read/Write
Mandatory
after the interface
should match those con-
are
portPhyX25OperTable
portLogicalX25OperTable
13
Advertisement
Table of Contents
