Table of Contents
Advertisement
portSdlcOperDisableRequestDisconnect
portSdlcOperLPDASupport (portSdlcOperTable.1.10)
portSdlcOperConnector (portSdlcOperTable.1.11)
portSdlcOperSpeed (portSdlcOperTable.1.12)
portSdlcAdminIdleFillChar (portSdlcOperTable.1.13)
portSdlcAdminInactivityTimer (portSdlcOperTable.1.14)
portSdlcAdminL1Duplex (portSdlcOperTable.1.15)
lsSdlcAdminTable (portSdlcGroup.3)
This table contains information about the PUs configured on an SDLC port. Note that
deleting of a PU entry does not affect the existence of the PU for the running protocol.
The PU record is removed from the database file, but will remain known to the node
until it is rebooted or until an online update of the port is performed. This is consistent
with the way PU information is handled when configuring through the user interface
menu system.
lSSdlcAdminLocalSub
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Local subscriber ID of the link station.
::= { lsSdlcAdminTable.1.1}
lSSdlcAdminRemoteSub
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Remote subscriber ID used to connect to remote link
::= { lsSdlcAdminTable.1.2}
lSSdlcAdminAutoCall
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Determines whether autocall is enabled for the link station.
::= { lsSdlcAdminTable.1.3}
MIB Reference
NlSubscriberAddress
Read/Write
Mandatory
NlSubscriberAddress
Read/Write
Mandatory
station.
INTEGER {No (
), Yes (
1
Read/Write
Mandatory
If enabled, the link station will initiate connection estab-
lishment, when appropriate. Otherwise, the link station
will listen to the connection request for establishment of a
connection with the remote PAD.
(portSdlcOperTable.1.9)
)}
2
51
Advertisement
Table of Contents
