Table of Contents
Advertisement
::= { nlLlc2TermConnectionTable.1.5 }
nlLlc2OrigConnectionTable (LLC2.3)
nlLlc2OrigConnectionSequence
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:LLC2 Host connection sequence number (a simple
::= { nlLlc2OrigConnectionTable.1.1}
nlLlc2OrigConnectionHSAP
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Service Access Point address used to connect to the host.
::= { nlLlc2OrigConnectionTable.1.2}
nlLlc2OrigConnectionType
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Remote subscriber device type.
::= { nlLlc2OrigConnectionTable.1.3}
nlLlc2OrigConnectionLocalSubscriberId
SYNTAX:
ACCESS:
STATUS:
MIB Reference
an existing conceptual row.
Note that all of the above values may be specified in a man-
agement protocol set operation, and only the
will be returned in response to a management protocol
retrieval operation. For a management protocol set opera-
tion, if other variable bindings are included in the same
PDU, then a
response is returned.
genErr
INTEGER (
)
1–16
Read only
Mandatory
identifier for each entry).
INTEGER (
)
4–254
Read/Write
Mandatory
This must match the SSAP (source SAP) in a frame
received from the local LAN or the DSAP (destination
SAP) in a frame from the remote link station.
INTEGER {
(SDLC),
1
Read/Write
Mandatory
NlSubscriberAddress
Read/Write
Mandatory
active
(LLC2)}
2
value
109
Advertisement
Table of Contents
