Interfaces Group (Mib-2.2) - Cabletron Systems SmartSwitch 1800 Reference Manual

Interfaces Group (mib-2.2)

ifNumber
SYNTAX:
ACCESS:
DESCRIPTION:Number of network interfaces configured/defined for this
::= { interfaces.1}
ifIndex
SYNTAX:
ACCESS:
DESCRIPTION:This number is assigned arbitrarily by the SNMP task as
::= { interfaces.2.1.1}
ifDescr
SYNTAX:
ACCESS:
DESCRIPTION:Describes the interface, including the manufacturer,
::= { interfaces.2.1.2}
ifType
SYNTAX:
ACCESS:
DESCRIPTION:Type of interface. Interfaces supported by the SmartSwitch
MIB Reference
INTEGER
Read only
node. This includes each physical port, logical port, and IP
interface.
INTEGER
Read only
interfaces are identified (usually during IPL).
DisplayString (0–255 bytes)
Read only
product name, and hardware version.
INTEGER, defined in MIB
Read only
1800/FRX/FRM devices will be mapped to MIB-defined
types, which are as follows:
Physical and Logical Ports:
Port Type MIB Type
4
X.25 or
17
SNA (SDLC)
32
Frame relay (DTE)
44 (DCE)
Trunk 200
201
Async
202
BSC Inter.
IP/IPX Interfaces:
Interface
5
Logical X.25
Network
X.25
Ethernet
802.3
802.5
Frame relay
MIB Type
1
1
5
6
7
9
32
(DTE)
44
(DCE)
141