Portx25Opertable; Portfrgroup (Port.2); Portfrconfigtable (Portfrgroup.1) - Cabletron Systems SmartSwitch 1800 Reference Manual

::= { portX25AdminTable.1.17 }

portX25OperTable

This table contains Read only variables that reflect the actual operating parameter
values. Unless a value was changed in the
became operational, the values in the
in the
portX25AdminTable
portX25OperBlockedFlag (portX25OperTable.1.1)
portX25OperFlowCtrlNeg (portX25OperTable.1.2)
portX25OperThruptClassNeg (portX25OperTable.1.3)
portX25OperLocChgPrev (portX25OperTable.1.4)
portX25OperRevChgAccpt (portX25OperTable.1.5)
portX25OperFastSelAccpt (portX25OperTable.1.6)
portX25OperInCallBar (portX25OperTable.1.7)
portX25OperOutCallBar (portX25OperTable.1.8)
portX25OperMaxPktSize (portX25OperTable.1.9)
portX25OperDefPktSize (portX25OperTable.1.10)
portX25OperMaxWinSize (portX25OperTable.1.11)
portX25OperDefWinSize (portX25OperTable.1.12)
portX25OperMaxThruptClass (portX25OperTable.1.13)
portX25OperCUGPref (portX25OperTable.1.14)
portX25OperCUGIndex (portX25OperTable.1.15)
portX25OperCUGIncAccess (portX25OperTable.1.16)
portX25OperCUGOutAccess (portX25OperTable.1.17)

portFrGroup (port.2)

portFrConfigTable (portFrGroup.1)

portFrRlpIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:RLP number of the frame relay port.
::= { portFrConfigTable.1.1}
20
allowed to make calls outside its CUGs.
portX25AdminTable
portX25OperTable
. The variables in the
portX25OperTable
INTEGER ( , which correspond to actual RLP numbers
1-8
)
0–7
Read only
Mandatory
after the interface
should match those configured
are listed below.
Cabletron Relay Access Products