Table of Contents
Advertisement
::= { nlLlc2HostTable.1.16 }
nlLlc2HostGroup
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Traffic group associated with LLC2 interface. The number
::= { nlLlc2HostTable.1.17 }
nlLlc2TermConnectionTable (LLC2.2)
This is a table of terminated hosts.
nlLlc2TermConnectionSequence (netlink.7.6.2.1.1)
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:LLC2 Host connection sequence number (a simple
::= { nlLlc2TermConnectionTable.1.1}
nlLlc2TermConnectionHSAP
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Service Access Point address used to connect to the host.
::= { nlLlc2TermConnectionTable.1.2}
nlLlc2TermConnectionLocalSubscriberId
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:LLC2 Host Connection's Local Subscriber ID. If
MIB Reference
The number is always
INTEGER (
)
1–4
Read only
Mandatory
is always
unless the node is an FRX7000.
1
INTEGER (
)
1–16
Read only
Mandatory
identifier for each entry).
INTEGER (
)
4–254
Read/Write
Mandatory
This must match the SSAP (source SAP) in a frame
received from the local LAN or the DSAP (destination
SAP) in a frame from the remote link station.
NlSubscriberAddress
Read/Write
Mandatory
configuring an LLC2-to-SDLC link, this ID must match
the Remote Subscriber configured on the SNA port for the
unless the node is an FRX7000.
300
107
Advertisement
Table of Contents
