Table of Contents
Advertisement
portFrBackupUseOnly
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Determines whether all DLCIs on the port will be reserved
::= { portFrConfigTable.1.15 }
portDLCIConfigTable (portFrGroup.2)
This table contains information about DCLIs configured on a frame relay port. Note
that deleting a DLCI entry does not affect the existence of the DLCI for the protocol
running on the port. The DLCI record is removed from the database file, but will
remain known to the node until it is rebooted. This is consistent with the way DLCI
information is handled when configuring through the user-interface menu system.
portDLCIRlpIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:RLP on which the DLCI is located.
::= { portDLCIConfigTable.1.1}
portDLCIPortIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Port number on which the DLCI is located.
::= { portDLCIConfigTable.1.2}
portDLCIIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:DLCI number used to identify the entry in the table.
::= { portDLCIConfigTable.1.3}
MIB Reference
INTEGER {no (1), yes (2)}
Read/Write
Mandatory
exclusively as backups for other DLCIs in the same node.
If yes is specified for this object, the port will remain dis-
abled until needed for backup
INTEGER (
, which correspond to actual RLP numbers
1-8
)
0–7
Read only
Mandatory
INTEGER (
, where
1–64
numbers
and
0–7
9–64
.)
8–63
Read only
Mandatory
INTEGER (
)
16–991
Read only
Mandatory
correspond to physical port
1–8
correspond to logical port numbers
25
Advertisement
Table of Contents
