Connecting A Central Site Product To A Csx100 Via Ppp; Ip Router To Ip Router With Network Address Translation Configuration - Cabletron Systems CyberSWITCH CSX5500 Quick Start Manual
Central site remote access switch
Hide thumbs
Also See for CyberSWITCH CSX5500:
- User manual (729 pages) ,
- User manual (178 pages) ,
- Release note (9 pages)
Table of Contents
Advertisement
QUICK START
c.
Under AppleTalk Port Information, configure a WAN UnNumbered port:
•
Select the WAN UnNumbered port type.
d. Under AppleTalk Static Routes, configure a static route to Central:
•
Enter Extended for Central's network type (the default).
•
Enter 10-13 as the destination network range (Central's network range).
•
Enter 0.0 as the next hop (it's over an unnumbered link).
•
Enter Central as the next hop's device name.
•
Enter 2 as the number of hops for this route.
•
Enter Engineering as Central's default zone name.
•
Enter Marketing as Central's second zone name.
4.
Under Security, select System Options and Information, then under System Information:
a.
Set your System Name (Remote). This matches up with Remote device information
configured on Central.
b. Set your System Secret (Remote_S). This matches up with Remote device information
configured on Central.
C
C
ONNECTING A
ENTRAL
In this section, we describe the configuration steps required for connecting a central site product to
a CSX100 via PPP. Separate instructions are included for two router-to-router applications,
IPX, and two router-to-bridge applications,
The documentation assumes that you are able to run QuickSET and have it find your CSX100. If
you are unable to run QuickSET, please refer to the Read Me First document on the CyberSWITCH
100 Family with QuickSET CD-ROM.
IP R
IP R
OUTER TO
OUTER WITH
With Network Address Translation (NAT), the CSX100 has one real IP address on the WAN and
you can create your own IP addresses on the LAN. Using DHCP, you can create any range of
addresses for the PC's on the LAN to use. When a PC requests to access the WAN, the CSX100
sends its own valid WAN IP address instead of the address on the PC. The outside world is
unaware of the IP addresses used on the LAN. NAT reduces the number of IP addresses needed
for a remote network by using only one address, instead of needing one address for the router, and
one address for each PC on the remote network.
CSX5500
199.2.2.2
24
CyberSWITCH
S
P
ITE
RODUCT TO A
N
ETWORK
ISDN
"Central"
LAN IP Address 199.2.2.1
Phone 13135551111
CSX100
IPX
and AppleTalk.
A
T
DDRESS
RANSLATION
WAN IP Address 199.2.2.3
"Remote"
LAN IP Address 192.168.254.1
Phone 13135552222
DHCP Range
192.168.254.2
192.168.254.20
192.168.254.2
PPP
VIA
C
ONFIGURATION
CSX100
C A B L E T R O N S Y S T E M S
192.168.254.3
IP
and
Advertisement
Table of Contents
