Table of Contents
Advertisement
bsciDevOperTable (portBsciGroup.6)
This table contains Read only variables that reflect the actual operating parameter
values. Unless a value was changed in the
became operational, the values in the
in the
bsciDevAdminTable
bsciDevOperControlUnitID
bsciDevOperDeviceUnitID (bsciDevOperTable.1.2)
bsciDevOperConnectionID
bsciDevOperSingleUserVC
bsciDevOperTransTextSupported (bsciDevOperTable.1.5)
bsciDevOperPrinterAttached
bsciDevAdminDisableStatusRequest
portSdlcGroup (port.5)
portSdlcAdminTable (portSdlcGroup.1)
portSdlcAdminMAXRetries
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Maximum number of retries to a non-responding Link
::= { portSdlcAdminTable.1.2}
portSdlcAdminMAXOut
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Level-2 window size, the maximum number of sequen-
::= { portSdlcAdminTable.1.3}
portSdlcAdminPadType
SYNTAX:
ACCESS:
STATUS:
46
bsciDevAdminTable
bsciDevOperTable
. The variables in the
bsciDevOperTable
(bsciDevOperTable.1.1)
(bsciDevOperTable.1.3)
(bsciDevOperTable.1.4)
(bsciDevOperTable.1.6)
INTEGER (
)
0–99
Read/Write
Mandatory
station before: (a) putting the Link station onto the slow-
poll list if it is not
Normal Response Mode
necting the link station if it is
INTEGER (
)
1–128
Read/Write
Mandatory
tially numbered frames that can be waiting for acknow-
ledgment. If this number is exceeded, no more frames will
be transmitted until an acknowledgment is received.
INTEGER {XPAD (
Read/Write
Mandatory
after the interface
should match those configured
are listed below.
(bsciDevOperTable.1.7)
or (b) discon-
state.
data txfr
), TPAD (
), HPAD (
1
2
Cabletron Relay Access Products
), NPAD (
)}
3
4
Advertisement
Table of Contents
