Subscriber (Netlink.7.5); Nllocalsubscribertable (Subscriber.1) - Cabletron Systems SmartSwitch 1800 Reference Manual

Mib reference guide for cabletron frame relay products
Hide thumbs Also See for SmartSwitch 1800:
Table of Contents

Advertisement

::= { nlIfIpSecondaryAddrTable.1.7 }

subscriber (netlink.7.5)

nlLocalSubscriberTable (subscriber.1)

nlLocalSubscriberId
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Subscriber ID. A valid subscriber ID is a string of numeric
::= { nlLocalSubscriberTable.1.1}
nlLocalSubscriberName
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Subscriber name. The subscriber name is not accessible
::= { nlLocalSubscriberTable.1.2}
nlLocalSubscriberAlgorithm
SYNTAX:
ACCESS:
STATUS:
MIB Reference
wishing to delete all of the instances associated with
an existing conceptual row.
Note that all of the above values may be specified in a man-
agement protocol set operation, and only the
will be returned in response to a management protocol
retrieval operation. For a management protocol set opera-
tion, if other variable bindings are included in the same
PDU, then a
response is returned.
genErr
NlSubscriberAddress
Read only
Mandatory
digits represented by their ASCII equivalents. The ASCII
equivalents of the wildcard characters '*' and '?' are also
allowed. A '*' is a wildcard that matches any number of
digits, including zero. A '?' is a wildcard that matches any
single digit.
DisplayString (up to 31 characters)
Read only
Mandatory
from SNMP, and a blank string is always returned.
INTEGER {
}
1–4
Read/Write
Mandatory
value
active
95

Advertisement

Table of Contents
loading

Table of Contents