::= { nlLlc2OrigConnectionTable.1.10 }
nlLlc2NextHost
nlLlc2NextHostNumber
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Host number to be used for the next-created Host record.
::= { llc.2.4}
pinStatusTable (netlink.7.7.4)
portPinRlp
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:RLP number.
::= { pinStatusTable.1.1}
portPinPort
SYNTAX:
112
ceptual row and to have its status automatically set
to active, making it available for use by the
managed device. For a management protocol set
operation, a
genErr
row already exists.
, which is supplied by a management station
destroy
wishing to delete all of the instances associated with
an existing conceptual row.
Note that all of the above values may be specified in a man-
agement protocol set operation, and only the
will be returned in response to a management protocol
retrieval operation. For a management protocol set opera-
tion, if other variable bindings are included in the same
PDU, then a
response is returned.
genErr
INTEGER (
)
1–128
Read only
Mandatory
On any device except FRX7000, this value is always
INTEGER (
, which correspond to actual RLP numbers
1–8
)
0–7
Read only
Mandatory
INTEGER (
, which correspond to actual physical ports
1-8
)
0–7
response is returned when the
active
Cabletron Relay Access Products
value
.
1