::= { rlpThreshTable.1.6}
rlpThreshRtxFramesPerSec
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Per-second threshold for the statistic
::= { rlpThreshTable.1.7}
portThreshTable (statThresh.2)
portThreshRlpIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:RLP number.
::= { portThreshTable.1.1}
portThreshIndex
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Port number.
::= { portThreshTable.1.2}
portThreshRxFramesPerSec
SYNTAX:
ACCESS:
STATUS:
DESCRIPTION:Per-second threshold for the statistic
MIB Reference
threshold (in either direction), an alarm is generated.
INTEGER (
)
0–65535
Read only
Mandatory
rlpStatsFrameRetransmits
retransmitted on the RLP. (This corresponds to the
database parameter
Retransmitted frames per sec
measured value for the statistic crosses the threshold (in
either direction), an alarm is generated.
INTEGER (
, which correspond to actual RLP numbers
1–8
)
0–7
Read only
Mandatory
INTEGER (
, which correspond to physical port
1–8
numbers
)
0–7
Read only
Mandatory
INTEGER (
)
0–65535
Read only
Mandatory
which is the number of frames received on the port. (This
corresponds to the database parameter
, which is the number of frames
portStatsInFrames
Received frames/
.) If the
,
133