Chapter 4 Monitoring And Managing Your Smartstack Ethernet Els10-27; Smartstack Ethernet Els10-27 Management Tools - Cabletron Systems SmartSTACK ETHERNET ELS10-27 User Manual

Enterasys smartstack els10-27: user guide

Table of Contents

YOUR SMARTSTACK ETHERNET ELS10-27

Monitoring the SmartSTACK Ethernet ELS10-27 consists of collecting and

analyzing statistics and system status information.

You can use the Select button on the front panel of the SmartSTACK

Ethernet ELS10-27 to monitor segment status on any of the Ethernet ports.

Refer to Section 2.1 for a description of the segment status options.

Basic management of the SmartSTACK Ethernet ELS10-27 consists of

disabling or enabling Ethernet ports, setting the community name for the

SmartSTACK Ethernet ELS10-27, and changing the baud rate for your

Local Console Manager (LCM) connection.

4.1 SMARTSTACK ETHERNET ELS10-27 MANAGEMENT

TOOLS

LCM is a command-line interface built into the SmartSTACK Ethernet

ELS10-27 that enables you to monitor and manage the SmartSTACK

Ethernet ELS10-27 through the out-of-band RS232C connection attached

to any non-intelligent terminal. You can also use one of the following

Cabletron Systems Network Management Stations (NMSs), or a standard

SNMP-based NMS to manage the SmartSTACK Ethernet ELS10-27:

¥ SPECTRUM

¥ SPMA

¥ SPEL

¥ Any SNMP-based NMS

CHAPTER 4

MONITORING AND MANAGING

4-1

Table of Contents

Need help?

Do you have a question about the SmartSTACK ETHERNET ELS10-27 and is the answer not in the manual?