Cabletron Systems SmartSTACK ETHERNET ELS10-27 User Manual page 37

If a line contains the text Ò[? for syntax]Ó one of the following displays will detail the
syntax.
additional command syntax:
switch [802.1d | 802.1Q]
cut[-through] | store[-and-forward]
[back[pressure] {on | off}]
enable [PORT-RANGE [RIP]] [TransmitPacing]]]
port [PORT-RANGE [speed {auto | 10[Mbps] | 100[Mbps]}]
[duplex {auto | full[-duplex] | half[-duplex]}]
[storm THRESHOLD TIME-INTERVAL]
[vlan {name |VLAN-ID}]
[802.3x [ßow control] {on | off}]
[GVRP {On | off}]
[access {add | del[ete]}]]
reboot [SECONDS [down[load]] | off]
[par[ameters] PATH [IP-ADDR [GATEWAY-ADDR]]]
route [add | del GATEWAY-ADDR]
[display [IPADDR]]
traceroute [-m MAX_HOPS][-q NQUERIES][-w WAIT] HOST_IP [DATA_SIZE]
vlan [add PORT-RANGE NAME VLAN-ID [IP-ADDR] [MASK]]
[del[ete] PORT_RANGE NAME VLAN-ID]
[res[trict] {add | de[lete]} PORT-RANGE VLAN-ID]
ipmulticast [add | del[ete] IPMADDR PORT-RANGE IPMADDR]
mirror [port {add | del[ete]} SRC-PORT DEST-PORT]
[address]{add | del[ete]} MAC-ADDRESS DEST-PORT]
[on | off]
ipmÞlter [add IPMADDR PORT-RANGE]
[del[ete] IPMADDR]]
[on | off]
trunk [add PORT-RANGE]
[del[ete] PORT-RANGE]
workgroup [NAME [{del[ete] | PORT_RANGE [INFO]]}]
Introduction
1-21