Displaying Mac Addresses - Cabletron Systems SmartSTACK ETHERNET ELS10-27 User Manual

Monitoring and Managing Your SmartSTACK Ethernet ELS10-27
Port 1 Status
Type/Speed:
VLAN ID:
GVRP:
Port Mirroring:
Duplex Mode:
Bridging:
Enabled/Disabled:
Spanning Tree:
Trunking State:
Pkts Transmitted:
Pkts Received:
Carrier Losses
Total Collisions
Excess Collisions:
RX Missed pkts:
RX Runt pkts:
RX FCS/Align Errs:
Internal TX Errs:
Type <CR> to display port 2 status...>
If you do not want to view the status of port 2, use the Ctrl-C keys to
return to the LCM prompt.
You can view the status for multiple of ports by typing
indicating the range of port numbers, for example

4.5.2 Displaying MAC Addresses

The
addresses display
SmartSTACK Ethernet ELS10-27 Bridge Address Table. The display
includes:
¥ The MAC address
¥ VLAN ID
¥ VLAN Name
4-10
10B-TPX/10Mbits
Blue
Enabled
No
Half Duplex
Transparent Bridging
Enabled, Rip listening, port w/o link
Without link
Off
0
0
0
0
0
0
0
0
0
command displays all MAC addresses in the
0X001
status
status 2-6
and
.