Address Display - Cabletron Systems SmartSTACK ETHERNET ELS10-27 User Manual

Introduction
reboot [SECONDS [down[load]] | off]
[par[ameters] PATH [IP-ADDR [GATEWAY-ADDR]]]
If you enter a reboot command, the following is displayed:
ELS10-27>reboot 300
Re-boot pending in 300 seconds
If you then follow this with the reboot ÔoffÕ command within 300 seconds,
the following is displayed:
ELS10-27>reboot off
No re-boot pending

Address Display

The address display command displays the MAC addresses, whether the
address has been learned, the port the address is known on, and how old
the address entry is. In 802.1Q mode, the following is displayed. If the
unit was operating in 802.1D mode, the VLAN ID and VLAN Name are
not displayed.
ELS10-27> address display
Address
00:40:27:00:55:bf
00:40:27:00:58:17
00:00:0c:19:ce:35
00:80:cf:00:02:b7
00:00:c0:d8:f2:9a
00:40:27:07:b4:9d
00:00:c0:b7:08:0e
08:00:20:79:fb:df
00:00:1d:1d:63:3c
00:00:86:09:99:31
08:00:20:0f:ca:03
08:00:20:7b:d5:58
1-30
Type Port
Learned 26
Learned 26
Learned 26
Learned 26
Learned 26
Learned 26
Learned 26
Learned 17
Learned 26
Learned 26
Learned 26
Learned 26
Age(secs) VLAN ID
1 0x003
14 0x003
4 0x003
215 0x003
80 0x002
134 0x003
10 0x003
1 0x005
0 0x003
8 0x003
53 0x005
223 0x003
VLAN Name
Blue
Blue
Blue
Blue
Green
Blue
Blue
Green
Blue
Blue
Green
Blue