Cabletron Systems ESXMIM Installation Manual page 58

Appendix B: BRIM/EPIM Information
BRIM-F0: 100 Mbps FDDI Dual Attached Station (DAS) BRIM. The
BRIM-F0 provides two Multimode Fiber Optic - Physical Medium
Dependent (MMF-PMD) compliant Media Interface Connector ports.
BRIM-F5: 100 Mbps FDDI Dual Attached Station (DAS) BRIM. The
BRIM-F0 provides two Single Mode Fiber Optic - Physical Medium
Dependent (SMF-PMD) compliant Media Interface Connector ports.
BRIM-F6: 100 Mbps FDDI Dual Attach Station (DAS) BRIM. The
BRIM-F6 supports the use of FDDI Port Interface Modules (FPIMs). The
following FPIM types are currently available:
• FPIM-00: MMF-PMD FDDI Port Interface Module with one
multimode fiber optic Media Interface Connector port
• FPIM-01: MMF-PMD FDDI Port Interface Module with one
multimode fiber optic SC port
• FPIM-02: TP-PMD FDDI Port Interface Module with one UTP RJ45
port
• FPIM-04: TP-PMD FDDI Port Interface Module with one STP RJ45
port
• FPIM-05: SMF-PMD FDDI Port Interface Module with one single
mode fiber optic Media Interface Connector port
• FPIM-07: SMF-PMD FDDI Port Interface Module with one single
mode fiber optic SC port
CRBRIM-W/E: Cisco Router Ethernet to Wide Area BRIM. The
CRBRIM-W/E provides one internally-connected Ethernet interface and
two external Wide Area Network interfaces. The CRBRIM-W/E is
available with three levels of functionality:
• CRBRIM-W/E-IP: Routes TCP/IP traffic only
• CRBRIM-W/E-DESKTOP: Routes IP, IPX, DECNet, and
AppleTalk protocols
• CRBRIM-W/E-ENT: Routes all standard Cisco protocols
B-2 ESXMIM/ESXMIM-F2 Installation Guide